Air Conditioning Installation in Loveland, CO
Air Conditioning Installation replaces a worn-out or undersized cooling system with one sized and set up for your home, so it cools evenly on hot afternoons without running itself ragged. Honest recommendations and clear upfront pricing, from background-checked, drug-tested technicians.
What Air Conditioning Installation Involves
Air Conditioning Installation is the removal of your old cooling equipment and the setup of a new central air conditioner or heat pump, matched to your home's size, ductwork and furnace. You need it when the system no longer keeps up, when repairs are coming every summer, or when the unit is old enough that a major failure is likely.
A new system is only as good as the way it goes in. An oversized unit short-cycles and wears out early; an undersized one runs all afternoon and never catches up. A good installation starts with a sizing calculation, not with the label on the old unit.
Most homes in Loveland use a gas furnace for heat and a central air conditioner for cooling. Those two systems share the indoor blower and the coil that sits on top of the furnace, so a new air conditioner has to be matched to the furnace it will work with.
Signs It's Time for an Air Conditioner Replacement
No single sign settles it. Weigh these together:
- Age. Central air conditioners commonly last somewhere in the range of 12 to 15 years, depending on care and how hard they run.
- R-22 refrigerant. Systems built before about 2010 often use R-22, which is no longer produced. Recharging one gets more costly every year.
- Repairs every summer. One repair is normal. A pattern of them usually means more are coming.
- Major failure. A failed compressor or leaking coil on an older unit often costs a large share of what a new system would.
- Uneven cooling or rising power bills. Both can point to a system that has lost efficiency or was never sized right.
If you're not sure, start with a diagnosis. Our Air Conditioning Repair technicians will tell you honestly whether a repair makes sense or whether replacement is the better use of your money.
What's Included in an Air Conditioning Installation
- An in-home sizing calculation that accounts for square footage, insulation, windows, sun exposure and the thinner air at about 5,000 feet, which affects how much heat an outdoor coil can move.
- A look at your ductwork, electrical service and furnace to confirm the new system will work with what you have, or to tell you what needs to change.
- Written options at more than one efficiency level, with upfront pricing for each.
- Permit handling where one is required, including scheduling the city's final check.
- Removal of the old equipment with refrigerant recovered according to EPA rules.
- A matched outdoor unit and indoor coil, set on a level pad with proper clearance.
- New or cleaned refrigerant lines, pressure-tested and pulled into a deep vacuum before charging.
- Electrical connections, including a disconnect at the outdoor unit and correctly sized wiring.
- A condensate drain routed to carry water away from the furnace.
- Thermostat setup matched to the new system and furnace.
- Startup testing of refrigerant charge, airflow and temperature drop across the coil.
- A walkthrough of how to run the system, where the filter goes and how often to change it.
How to Choose the Right System
A few terms come up in every quote. Here's what they mean.
Efficiency Ratings
Air conditioners are rated by SEER2, a measure of how much cooling you get for the electricity used across a season. A higher number means lower operating cost, but a higher price up front. With a short cooling season like ours, the most efficient model doesn't always pay for itself. We'll show you where the payback makes sense for how you use your home.
Single-Stage, Two-Stage and Variable-Speed Systems
A single-stage unit runs at full power or not at all. Two-stage and variable-speed units can run at lower output for longer, which evens out room temperatures, quiets the system and handles mild days more efficiently. They cost more and pay off best in homes with hot upstairs rooms.
Refrigerant
New systems use newer refrigerants such as R-454B or R-32 that replaced R-410A in new equipment. The outdoor unit, indoor coil and lines must be matched to that refrigerant, which is why a proper install often replaces the indoor coil too.
A Heat Pump Instead of an Air Conditioner
A heat pump cools exactly like an air conditioner, then reverses to heat your home in cooler weather. Paired with a gas furnace, it handles cooling and milder heating days while the furnace takes over in deep cold. ENERGY STAR's heating and cooling guidance is a good primer on proper sizing and efficient equipment.
If your furnace is near the end of its life too, replacing both at once can save labor and gives you a matched system. Our Furnace Installation team can price that alongside your cooling options.
Services We Offer
Why a Careful Installation Matters
How a system is installed affects its life as much as the brand on the box. A wrong refrigerant charge, a poor vacuum or restricted airflow can cost efficiency from day one.
Our climate asks a lot of the outdoor unit. Strong afternoon sun, spring hail and cottonwood fluff all land on the condenser. Good clearance, a level pad and easy access for cleaning help it hold up.
A new system also deserves care from its first summer. Dirt, dust and debris are the number one cause of air conditioning and heating breakdowns, and a yearly Air Conditioning Deep Clean and Tune-Up keeps a new coil working like new.
What Happens During Air Conditioning Installation
- Consultation at your home. A technician measures, looks at your ductwork, furnace and electrical service, and asks how your home cools now.
- Options and upfront pricing. You get written options with prices that don't change once you've approved them. There's no pressure, and a Free Second Opinion is always available.
- Permit and scheduling. We pull any required permit and set an installation date.
- Installation day. The crew wears shoe covers, lays drop cloths and protects the path through your home. They recover the old refrigerant and install the new system.
- Testing. The system is pressure-tested, evacuated, charged and run through full cooling cycles.
- Walkthrough and cleanup. You learn how to run the thermostat and change the filter. The old equipment leaves with us, and the work areas are left clean.
- Final sign-off. Where a permit is required, we schedule the city's final check.
Most straightforward replacements finish in one day. Jobs that need new ductwork, electrical upgrades or a furnace replacement can take longer, and we'll tell you the timeline up front.
Frequently asked questions
Have questions? We've got answers. Browse the frequently asked questions below to learn more about our heating services, what to expect during your appointment, and how Fix-it 24/7 can help keep your home warm, comfortable, and running efficiently all season long.
Yes. If another company has told you that your system needs replacing, a Fix-it 24/7 technician will review the diagnosis and the quote and tell you honestly whether we agree. Sometimes replacement is the right call. Sometimes a repair will keep the system running well for several more summers. If replacement does make sense, we'll show you Air Conditioning Installation options with upfront pricing so you can compare fairly. There's no pressure either way.
For many homes, yes. A heat pump cools exactly like a central air conditioner and can also heat your home, which lowers how often the furnace has to run. Cold-climate heat pumps keep heating at much lower outdoor temperatures than older models. Many homeowners pair one with their gas furnace so the furnace takes over in deep cold. Whether it pays off depends on your electrical service, ductwork and energy costs. During an Air Conditioning Installation consultation, a Fix-it 24/7 technician will price both options side by side.
Replacing both at once makes sense when the furnace is also near the end of its life, usually 15 years or older, or when you want a variable-speed system where the furnace blower and air conditioner work as a team. Doing both together saves on labor and ensures the equipment is matched. If your furnace is younger and in good shape, Air Conditioning Installation alone is usually fine, as long as the new indoor coil fits and matches the furnace. A technician will look at both and give you upfront prices for each option.
The right size comes from a load calculation, not from square footage alone or the size of your old unit. A proper Air Conditioning Installation calculation looks at insulation, window size and direction, ceiling height, sun exposure, ductwork and elevation. Around 5,000 feet, thinner air changes how much heat an outdoor coil can move, so a system sized for sea level may not perform as rated. An oversized unit short-cycles and leaves the house clammy, and an undersized one runs nonstop on hot afternoons. A Fix-it 24/7 technician will do the calculation in your home before recommending a size.
New systems include manufacturer warranties (typically 5-10 years on parts) plus our installation warranty. Extended warranty options are available.
Plan Your Air Conditioner Replacement in Loveland
Book a consultation, and we'll size the system to your home, explain your options and give you an upfront price.